Home users are increasingly aware of their safety and deploying a range of smart sensors and home security devices throughout the house. The deployment of home security equipment is generally matched with each functional area of the house, such as the smart door lock, smart cat eye and doorbell, visual intercom, door magnetic sensor, etc. are installed at entrance area. A home-care camera installed in the living room; Gas leakage sensors, smoke detectors and water leakage detectors are installed in the kitchen area; Temperature sensors are installed in bedrooms; For balcony area, infrared grating security alarm equipment is installed.
Most users will focus on security at the entrance to their home and inside, ignoring the security of French Windows and balconies. But the reality is that the balcony area is no less likely to be invaded suddenly than the entrance to a house, especially a low-floor residence.
The traditional prevention technology adopts magnetic switch of door and window and curtain detector as the safety protection anti-theft of window balcony. But this does not stop the burglars from entering. Instead, an alarm is raised after the burglars have entered the house.
Infrared grating is installed at outdoor of balconies and windows areas.
Infrared grating is a kind of active infrared detector with multi-beams of infrared lighting. The transmitter keeps sending infrared lighting at the way of low frequency emission, time division detection to the receiver. Once a person or an object blocking any of the adjacent two beams of lighting emitted more than 30 ms, the receiver will send output alarm signal immediately. But if there is a small animal or small object blocking a beam of light, the receiver will not send output alarm signal.
The advantages of infrared grating:
Low-frequency infrared emission: no interference to household appliances (remote control system).
Intelligent optical intensity detection: reduce power consumption and false alarm.
Detection range: 5m, 10m, 15m, 30m, 40m, 60m, 80m, 100m
Strong anti-interference ability: used in harsh outdoor environment where wind, frost, rain, snow, fog, tide and sunlight are slanting
It can also be used for vehicle detection at the entrance and exit of indoor parking lots.
How to install infrared grating?
Easy install the infrared grating with 3 steps.
1. Fix the transmitter and receiver terminals on the wall.
2. Calibrate the transmitter and receiver terminals.
3. Tighten the tuning screw.
Video guidance for installing windows photoelectric infrared grating at https://www.vedard.com/HB-T001S.html
Window balcony anti-theft new security equipment
